To reset the ProxySG back to the "out-of-the-box" configuration or default settings take the following steps:
1. Connect to the ProxySG CLI through the serial interface or a terminal server.
2. Press enter 3 times.
3. Choose option 1: "Command Line Interface".
4. Enter enable mode by entering the command "en".
5. At the prompt enter "restore-defaults factory defaults".
6. The system message "Continue with system re-initialization?". Enter Y for the system to proceed with re-initialization.
7. Sit back and wait.
8. Re-initialization is now complete.
Wednesday, August 26, 2009
Internet Content Adaption Protocol (ICAP) Fundamentals
Core points on ICAP:
* The Blue Coat AV (virus checking) is an external service which the ProxySG can communicate with using ICAP.
* The policy definition is conducted on the ProxySG using the management console or Content Policy Language.
* There are two modes of operation: RESMOD and REQMOD. In REQMOD the ProxySG intercepts and forwards requests from the client to the origin server for parsing. In RESMOD the ProxySG (ICAP client) intercepts the response from the origin server and uses ICAP to communicate with the external service to process the response message.
* The Blue Coat AV (virus checking) is an external service which the ProxySG can communicate with using ICAP.
* The policy definition is conducted on the ProxySG using the management console or Content Policy Language.
* There are two modes of operation: RESMOD and REQMOD. In REQMOD the ProxySG intercepts and forwards requests from the client to the origin server for parsing. In RESMOD the ProxySG (ICAP client) intercepts the response from the origin server and uses ICAP to communicate with the external service to process the response message.
Subscribe to:
Posts (Atom)